Theater Music Technology Co.,Ltd

Products

    C seriesActive Speaker

    C series Active Speaker

    Model:C5、C6、C8

    Monitor speaker

    Description

    Monitor speaker

    Parameter
      Type: 5-inch monitoring speaker
      Frequency response: 48 Hz -45 kHz
      Frequency range: -45 43Hz KHz
      Amplifiers: Low frequency 40W, high frequency 30W
      Signal to noise ratio: 100 dB
      Cross frequency: 2.8 kHz
      Low frequency driver: 5-inch (127mm) Kevlar curved cone and high damping rubber wrapped Kevlar curved cone
      High frequency driver: 1 inch (25mm) magnetic shielded natural wire dome
      Input connector: 1 XLR X balanced input connector/1 TRS X balanced unbalanced input connector
      Input impedance: 20 K balanced, 10 K unbalanced
      Indicator: Power on/off rear panel indicator
      Power requirement: 115-230V
      Box material: high-density medium fiber board
      Dimensions (length * width * height): 176mm x 200mm x 250mm
      Weight (excluding packaging): 5 kilograms per piece

      Type: 6-inch monitoring speaker
      Frequency response: 45 Hz -45 kHz
      Frequency range: -40Hz Hz
      Amplifiers: Low frequency 70W, high frequency 60W
      Signal to noise ratio: 100 dB
      Cross frequency: 2.5 kHz
      Low frequency driver: 6-inch (153mm) Kevlar curved cone with high-temperature voice coil and damping rubber surround sound.
      High frequency driver: 1.25 inch (32mm) magnetic shielding natural silk dome
      Input connector: 1 XLR X balanced input connector/1 TRS X balanced unbalanced input connector
      Input impedance: 20 ohm balanced, 10 unbalanced
      Indicator: Power on/off rear panel indicator
      Power requirement: 115-230V
      Box material: high-density medium fiber board
      Dimensions (length * width * height): 213mm x W 249 x 318mm
      Weight (excluding packaging): 7.5 kilograms per piece

      Type: 8-inch monitoring speaker
      Low frequency amplifier power: 70W
      High frequency amplifier power: 60W
      Frequency response: 42 Hz -45 kHz
      Frequency range: -45 37Hz kHz
      Amplifier: If 70W, high-frequency 60W
      Maximum signal-to-noise ratio (dynamic range): > 100dB
      Input impedance: 20 K ohm balanced, 10 K ohm unbalanced
      Input sensitivity: 85 mV (90dBA)
      Power supply: 115-230V
      Box material: high-density medium fiber board
      Protection: RF interference, output current limiting, over temperature, transient on/off, subsonic filter, external power fuse
      Dimensions (length * width * height): 254mm x 305mm x 381mm
      Weight (excluding packaging): 12 kilograms per piece
    * Page content update time:07-12-2024,The relevant information on the website is for reference only. All products are subject to physical inspection and are subject to change without prior notice.